ILX34-MBS485 Monitoring and Operation Serial Module

Description

ILX34-MBS485 Functions and Features
Purpose: A device that converts the measured AC voltage signal into a linear DC analog signal through isolation.
Measurement: single-phase/three-phase AC voltage
Input: 100Vac, 300Vac
Accuracy: ± 0.2% RO
Output: 4-20mAdc, 0-10Vdc and other analog signals
Working power supply: AC220V ± 10%, AC/DC85~265V, or DC24V
Installation method: 35mm standard guide rail, base screw installation

ILX34-MBS485 Features ¨

Add-on Instruction creates UDTs, providing logical definitions for I/O, status, and control data. ¨

Diagnostic data available in RSLogix 5000/Studio 5000 controller tags, allowing decisions to be made based upon node health. ¨

Module configuration is backed up in the CompactLogix project (ACD file). ¨

The serial port can be enabled or disabled through ladder logic. ¨ Supports up to 1,000 words of data. ¨

Supports up to 30 Modbus Commands & up to 36 words per command. ¨

The serial port can be configured as a Modbus Master or Modbus Slave device. ¨

Suitable for SCADA and field device interface applications.

Hardware Specifications
Specification Description
Power Supply 10 to 28.8 VDC (Two 24V power supplies needed
if using a Series A L16/L18 controller)
Pointbus Current 75mA @ 5 VDC
Serial Line Voltages RS-232: -15 to +15 VDC
RS-422/485: -7 to +12 VDC
Number of Inputs 1 Full duplex
Module Location 1734-TB or -TBS wiring base assembly (not
included)
1734-TOP or -TOPS
LED Indicators 1 green/red module status indicator
1 green/red network status indicator
2 green TXD, RXD status indicators
Operating Temperature 32°F to +131°F (0°C to +55°C)
Storage Temperature 32°F to +131°F (0°C to +55°C)
Relative Humidity 5% to 95% RH with no condensation
Dimensions
(H x W x D)
2.21 x 0.47 x 2.97 in
56 x 12 x 75.5 mm
Shock 30g peak acceleration (Operational)
50g peak acceleration (Non-operational)
Vibration Tested 5g @ 10 to 500 Hz
ESD immunity 6kV contact discharges
8kV air discharges