LAM 810-800031-300 PCB expansion card

Description

Model: LAM 810-800031-300，Due to the large number of goods, only some goods have been uploaded. If you can’t find the goods you want, please consult the seller, and we will serve you wholeheartedly.

This procedure explains how to replace Advanced Communication Modules (ACMs). If the

LAM 810-800031-300 Fault indicator is on or the Pass indicator is off, the module should be replaced.

For indicator information, see ACM Indicators on page 222.

LAM 810-800031-300 Procedure

1 Disconnect the communication cables from the faulty module. Do not break the cables

or disconnect the terminations from the ends of the cables—doing this will disrupt

communication with other devices. (Net1 DNBI cables are point-to-point and do not

have external terminations.)

2 If a hot-spare module is installed and its ONLINE indicator is on and SBRDY indicator

is off, remove the other (faulty) module by loosening the retractable fasteners, grasping

the fasteners and sliding the module out of the chassis.

If a hot-spare module is not installed, go to step 3.

3 Install an identical type module in the empty position of the slot and push the module

in until it is firmly seated. Tighten the retractable fasteners of the module to 10 inch

pounds.

4 Connect the communication cables to the just-inserted module—the Pass indicator

should go on after about 1 minute; the Active indicator should go on within 1 to 2

minutes.

5 If the just-inserted replacement module is not a hot-spare, wait until the Active and

Online indicators on the other (faulty) module are off, then remove the module.

6 On the faulty module, identify the model and serial numbers. Contact the Triconex

Customer Satisfaction Center to obtain a Returned Material Authorization (RMA)

number. Then return the module to Triconex for repair.

LAM 810-800031-300 Note In rare cases, faults in the I/A Series system or in the DNBI cables might cause an ACM

to fault. If following the above steps does not solve the problem, verify that the DNBI

cables are properly connected and in good working order. If the problem is still not

solved, contact the Triconex Customer Satisfaction Center for assistance.

LAM 810-800031-300 WARNING

• Triconex strongly recommends that you install a hot-spare for every

ACM in your Tricon controller. Because the ACM is not a TMR

module, a single fault could cause up to a one-second loss of

communication with the Distributed Control System (DCS)—until the

spare ACM becomes active. If there is no spare, communication is lost

until the ACM is replaced and initialized from the DCS. (Failure of the

ACM does not compromise the operation of the rest of the Tricon

controller.)

• If you have a hot-spare installed and the Active and Online indicators

are off on both modules, contact the Triconex Customer Satisfaction

Center.

LAM 810-800031-300

The following is our [main products]. If you need it, you can send it to help you compare the price!
Main business: world brand PLC, DCS system spare parts module
① Allen-Bradley (USA AB) Series Products
② Schneider series products
③ General Electric Series Products
④ Westinghouse Series Products
⑤ SIEMENS
⑥ Sales ABB Robots FANUC Robots、YASKAWA Robots、KUKA Robots、Mitsubishi Robots、OTC Robots、Panasonic Robots、MOTOMAN Robots。
⑦ Westinghouse: spare parts for OVATION system, WDPF system and MAX0 system.
⑧ Invensys Foxboro: I/A Series system, FBM (field input/output module) sequential control, ladder logic control, accident recall processing, digital-analog conversion, input/output signal processing, data communication and processing, etc. Invensys Triconex: redundant fault-tolerant control system, modern fault-tolerant controller based on triple module redundancy (TMR) structure.
⑨ Siemens (Siemens): Siemens MOORE, Siemens Simatic C1, Siemens CNC system, etc.
⑩ Bosch Rexroth: Indramat, I/O module, PLC controller, drive module, etc.
◆ Motorola: MVME 162, MVME 167, MVME1772, MVME177 and other series.
PLC module, programmable controller, CPU module, IO module, DO module, AI module, DI module, network communication module,
Ethernet module, motion control module, analog input module, analog output module, digital input module, digital output module
Module, redundant module, power supply module, relay output module, relay input module, processor module.
Our advantage is: new and original, with a one-year warranty! All products of the company have been strictly tested. Welcome to inquire and purchase. As long as you are sincere, our company will provide you with a price that is superior to that of the peers and win the order together

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the de

livery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 181 0693 7731

WhatsAPP：+8615359293870
Mail: 2872270648@qq.com
Contact: Chen