PFEA111-IP65 ABB tension amplifier for the steel industry

Description

When the PFEA111/112 is connected to the 24 VDC power supply the voltage between terminals X1:1 and X1:2 should be 18 – 36 V.

• If the voltage is lower than 18 V:

– Check the power supplies rating. Rating should be 18-36 V DC.

– Check that the power supply has sufficient capacity. See power requirements in Section 2.8.2 Power Supply Unit SD83x.

• If the power supply has sufficient capacity, check cabling and cable resistance between power supply and PFEA111/112.

• If power supply and cabling are correct, the tension electronics is probably defect. Replace PFEA111/112.

PFEA111 PFEA112
Display language English English
Display unit N N
Set Decimals 0 0
Load cells per roll 2 2
Object type Standard roll Standard roll
Load cell nominal load 1.0 kN 225 lbs 1.0 kN 225 lbs
Wrap gain 1 1
Current output
Filter setting 250 ms 250 ms
High tension 2000 N 2000 N
High output 20.00 mA 20.00 mA
Low tension 0 N 0 N
Low output 4.00 mA 4.00 mA
High limit 21.00 mA 21.00 mA
Low limit 0.00 mA 0.00 mA
Voltage output
Filter setting 250 ms 250 ms
High tension 2000 N 2000 N
Low tension 0 N 0 N
High output +10.00 V +10.00 V
Low output 0.00 V 0.00 V
High limit +11.00 V +11.00 V
Low limit -5.00 V -5.00 V
Profibus – Off
Address – 126

DT 370a GJR2237600R1
DSXS001
DSXS 001 57170001-A
DSU14I
DSU14
DSU10
DSTXW110
DSTX170
DSTX170
DSTX W110 57160001-AAP
DSTX 170 57160001-ADK
DSTV11057350001-A
DSTF620 HESN118033P0001
DSTF620
DSTF610
DSTDW150
DSTDW130
DSTD306
DSTD160
DSTD160
DSTD150A
DSTD150A
DSTD150
DSTD150
DSTD110A
DSTD108P
DSTD108
DSTD108
DSTD108
DSTD W150 57160001-AAK
DSTD W130 57160001-YX
DSTD 306 57160001-SH
DSTD 150A 57160001-UH
DSTD 150A
DSTD 110A 57160001-TZ
DSTC456
DSTC456
DSTC454
DSTC454
DSTC452
DSTC452
DSTC406
DSTC404
DSTC19057520001-ER/1
DSTC190
DSTC175 57310001-KN
DSTC175
DSTC12057520001-A/2
DSTC120
DSTA180F
DSTA180F
DSTA180
DSTA180
DSTA156B