PR6426/010-010+CON021 power module

Description

Measuring systems with eddy current transducers serve the measurement of mechanical quantities, such as shaft vibration and shaft displacement. Applications with such systems can be found in different industrial areas and laboratories. Due to the contactless measuring principle, small dimensions, a rugged construction and the endurance against aggressive media, this type of sensor is optimally suitable for the use at all kind of turbo machines. epro offers a wide range of devices for measuring and monitoring.

Measuring quantities are e.g.: – Air-gaps between rotating and stationary parts – Vibrations of machine shafts and housing parts – Shaft-dynamic and eccentricity – Deformation and deflection of machine parts – Axial and radial shaft displacement – Abrasion and position measurements at thrust bearings – Thickness of oil films in bearings – Differential expansion – Housing expansion – Valve position Construction and dimensions of measuring amplifier and relevant sensors apply to international standards, e.g. API 670, DIN 45670 and ISO 10817-1. At connection via safety barriers, sensors and signal converters may also be operated in hazardous areas. The certificate of conformity according to the European standard EN 50014/50020 has been submitted

n Non-contact measurement of static and dynamic shaft displacement – Axial and radial shaft displacement (position) – Shaft eccentricity – Shaft vibration (motion)

n High temperature applications, continuous operation up to 380˚ C (716˚ F)

n Meets international standards, DIN 45670, ISO 10817-1 and API 670

n Rated for explosive area, Eex ib IIC T6/T4

n Other displacement sensor selections include PR 6422, 6423, 6424 and 6425

n Select sensor driver such as CON 011/91, 021/91, 041/91, and cable for complete tranducer system

Target

Electrically conducting steel Cylindrical shaft n On measuring collars, if target surface is less than 40 mm (1.57 in) diameter, then error may be 1% or greater. n Error negligible when target surface is greater than 40 mm (1.57 in) in diameter. Peripheral speed of shaft: 0 to 2500 m/s Shaft diameter > 80 mm (3.15 in) Nominal gap (center of measuring range): 3.0 mm (.12 in)

Connection of transducers to
converters CON 011/CON 021:
Lemo plug

Connection of transducers to
converters CON 031 /CON 041:
open cable ends for screw
terminal

Direct connection of the sensor
with Lemo – plug to the following
MMS 3000 transmitters:
MMS 3110
MMS 3210
MMS 3311