Weighing tension PFTL101A 2.0KN

Weighing tension PFTL101A 2.0KN

Weighing tension PFTL101A 2.0KN

• The foundation for the load cell must be made as stable as possible. A sturdy construction reduces the vibration energy of the measuring roll and bearing arrangement.
• The surfaces closest to the load cell, and other surfaces that affect the fit must be machined
• There must not be any shims immediately above or below the load cell, as this may adversely affect the fl@tness Instead, shims may be placed between the adapter plate and the foundation or between the adapter plate and the bearing housing.
• The screws that secure the load cell must be tightened with a torque wrench.
• The bearing arrangement for the measuring roll must be designed to allow axial expansion of the roll with changes in temperature.
• Any drive to the roll must be applied in such a way that interfering forces from the drive are kept to a minimum.
• The measuring roll must be dynamically balanced.
• The mounting surfaces of the load cells must be on the same height and parallel with the measuring roll.
• In a corrosive environment, galvanic corrosion may occur between the load cell, galvanized screws and adapter plates. This makes it necessary to use stainless steel screws and adapter plates of stainless steel or equivalent. See adapter plates in A Drawings.